Blowing accessories

intelligenta lösningar för byggpraxis,

isolering ock högeffektiv isoleringsmaskin

Nozzle and blowing injection accessories

We differ between seven blowing injection methods:

  • Open/attic blowing
  • Dense blowing/insulating needle technique
  • Dense blowing with ventilated rotary nozzle
  • Dense blowing with ventilated injection lance
  • Damp spraying/CSO
  • Cavity wall insulation with injection nozzles
  • Element filling

For many blowing injection method are injection tools and/or auxiliary devices like injection bezels or sealing sponges necessary. We provide tools for every method.

Furthermore often an injection hole must be prepared (e.g. with an hole saw). This also needs to be closed after work. For that problem we provide closing solutions – sealing corks and wood fibre closing plugs.

Detailed information can be found in our brochure Nozzles And Injection equipment for download:

Injection bezels, clamping connectors

and sealing sponges

Injection bezels are used for hose blowing and working with injection lances. They ensure a dust reduced blowing injection and flowing movement with the hose or the lance. A damage of the building element is also avoided.

Clamping connectors make blowing injection of many injection holes in serial alignment easier. Ventilated clamps are used when the building element has not enough ventilation.

Sealing sponges are used for dust reduced hose blowing.

Injection nozzles and rotary nozzles

Fixed injection nozzles are proper for blowing injection of cavity walls and for the insulation of small box sections.

Rotary nozzles are injection nozzles with a pivot bearing. This makes the comfortable rotation of the nozzle outlet with a handle possible.

For big cavities this function is absolutely necessary because. Only with this method the material flow can be directed to reach a homogeneous agglomeration which accord to the license.

Insulating needles with piercing head

Bent pipe for insulating behind vapour barriers and other membranes, as well as for insulating hard boarded cavities (with a sufficiently large injection hole). Specially shaped head for piercing membranes.

Allows precise injection even into remote areas of cavities.

Easy redensification by fixed design

Excellence sealing by smooth finish

Material: Aluminium

Ventilated injection lances

Ventilated injection lances are used for filling laying or slightly inclined wall and roof elements. The lance is injected throw a hole in the frame right to the end of the element. The double pipe construction ensures a good ventilation of the excess air. At the lance outlet a ventilation cage is installed. The air is lead from there to the dust bag (passive ventilation) or to a dust removal system (active ventilation).

Ventilated rotary nozzles: X-Jet, J-Jet and S-Jet

Ventilated rotary nozzles can fill stud wall constructions with insulation material and conduct excess air controlled.

In this process the insulation material flowing with the injection air is accelerated by inflow in the rotary nozzle.

Hole saws and closing solutions

We have hole saws for a multiplicity of planking materials like OSB, gipsum board or wood fibre board on our range. Our sealing corks and wood fibre closing plugs are adjusted to the hole saws.

Therefore a gap free closing system for blowing injection holes is ensured.